Layflat Hoses Operation Instruction

1).Pre-inspection: Before using the PVC layflat hose, check for cuts, breaks, holes, or other visible damage that may affect its performance. Also, make sure the connections and couplings are in good condition.

2).Installation: Connect the PVC layflat hose to the water source or water pump using the appropriate couplings. Make sure the connections are securely fastened and there are no water leaks.

3).Use: Open the water valve or turn on the pump to allow water to flow through the PVC layflat hose. Adjust the water pressure as necessary for the job being performed.

4).Care and Maintenance: After using the PVC layflat hose, it is important to drain all remaining water to prevent the formation of mold and bacteria. Properly coil the hose and store it in a dry place protected from the sun and weather. If the hose is damaged, repair it before using it again.

5). Safety Precautions: Do not exceed the pressure capacity of the PVC layflat hose. Do not use it with hot water or corrosive chemicals. Do not leave it exposed to the sun for long periods of time, as this can weaken the material and reduce its lifespan. Keep it away from sources of heat and open flames.