Bonding and repairing of Double Reinforced PVC Hose

  • Categories:Industry News
  • Author:
  • Origin:
  • Time of issue:2021-11-03
  • Views:0

(Summary description)How to do the bonding and repair of Double Reinforced PVC Hose, the specific steps and methods are as follows.

Bonding and repairing of Double Reinforced PVC Hose

(Summary description)How to do the bonding and repair of Double Reinforced PVC Hose, the specific steps and methods are as follows.

  • Categories:Industry News
  • Author:
  • Origin:
  • Time of issue:2021-11-03
  • Views:0
Information

How to do the bonding and repair of Double Reinforced PVC Hose, the specific steps and methods are as follows:
1. Early inspection and treatment of the damaged Double Reinforced PVC Hose.
According to the color, softness and appearance of the hose, the degree of aging (the bond strength is low when the aging is serious) and the degree of damage can be judged, and the measures and methods for bonding repair can be determined. The manufacturer of Double Reinforced PVC Hose tells you to then clean the hose. Dirt, silt, oil stains, etc., and use scissors to cut away the free fibers dissolved by the oil stains around the holes, and expand and repair the old interface that has been broken for a long time.

quality Double Reinforced PVC Hose For sale
2. The manufacturer of Double Reinforced PVC Hose tells you about the production and use of simple circular and horizontal films for rubber separation. After positioning the film with a red and blue pencil, fix it on either end of the adjusting rope C with an aluminum wire or thin iron wire that can penetrate the hose, introduce the film into the tube, and pull C or C'to adjust the film to damage the hole. And unfold the uranium in the tube (if it is already coiled, you can adjust the hose by hand). The manufacturer of Double Reinforced PVC Hose tells you to choose an angle that is convenient for the glue and hose to be crimped at the same time, and tie it with a rope to fix it in the middle of the round mold, so that the length of each end of the round mold is a quarter. Clamp it again with pliers (but don't damage the hose too tightly). The damaged hole is in the center of the film.
3. The manufacturer of Double Reinforced PVC Hose tells you to make and bond the inner wall layer (that is, from the inner layer to the outer layer of the hose). Press the damaged hole with soft paper in advance, and cut along the marking line, which is the actual size and shape of the hole. Then use a red and blue pencil to draw on the coated tape paper.

Keyword:

Scan the QR code to read on your phone

Relate News

There is currently no information to display
Please add data record on website background.

COPYRIGHT   PAPAGENO GROUP CO.,LTD

津ICP备2020007851号