Introduction to the correct use of Hydraulic Hose Crimper

  • Categories:Industry News
  • Author:
  • Origin:
  • Time of issue:2022-06-09
  • Views:0

(Summary description)Do you know the correct way to use Hydraulic Hose Crimper? Let's explain it in detail today.

Introduction to the correct use of Hydraulic Hose Crimper

(Summary description)Do you know the correct way to use Hydraulic Hose Crimper? Let's explain it in detail today.

  • Categories:Industry News
  • Author:
  • Origin:
  • Time of issue:2022-06-09
  • Views:0
Information

Do you know the correct way to use Hydraulic Hose Crimper? Let's explain it in detail today.

Buy Hydraulic Hose Crimper Wholesale Price
1. Turn on the power. 
2. Unscrew the main power switch and turn on the gas source.
3. Enter the main interface of the touch screen, the manufacturer of Hydraulic Hose Crimper tells you to enter the parameter setting to open the terminal machine, and then return to the automatic operation interface. 
4. Select the size according to the requirements of the work instruction, make sure that the riveted head is at the position of "1", and select the crimping mode in the two modes of crimping and cutting. 
5. Put in the wires of the same specification and color, and enter the conduit in sequence along the rollers. The wires can be exposed to the conduit. The two rollers are pressed firmly, and the wires are pulled by hand, but they cannot be pulled.
6. Select the mold of the riveted plug-in, put it on the equipment, tighten the knob to make sure the mold is firmly locked, turn on the power of the terminal machine, and press the "Auto/Manual" button, the red light on the display is manual, and the green light is automatic. When the red light is displayed, press forward or reverse, and when the upper mold of the mold is pressed down to a normal rotation, it can be done. The Hydraulic Hose Crimper manufacturer tells you that if it does not match, you can adjust the adjusting nut on the mold.
7. Install the plug-in of the corresponding specification, put the paper into the reel, send the plug-in to the center of the mold, press down the mold, reconfirm the height of the mold, use forward or reverse rotation to check, and adjust to normal Turn around once. Set the terminal machine to automatic.
8. Select the jog movement on the display screen, and then press the start button to adjust the line, mold and plug-in in place. Carry out riveting and adjust it to the appropriate position according to the requirements of the work instruction.
9. The Hydraulic Hose Crimper manufacturer will tell you the final locking nut, archive the variety, and confirm whether the riveting firmness meets the requirements. 
10. After completion, turn off the power of the terminal machine, the interface returns to the entering state, turn off the main power supply, turn off the gas source, and disconnect the power switch.
11. The protective safety cover cannot be knocked or people lean on it, so as not to damage the protective cover.
12. The manufacturer of Hydraulic Hose Crimper tells you that tools and other sundries are prohibited on the protective safety cover.
13. When the machine is running, the safety cover must be covered, and do not put your hands into the working area of ​​the machine to avoid injury.
14. The manufacturer of Hydraulic Hose Crimper tells you to clean up the knocked-down terminals when replacing the molds and terminals. When there is no terminal waste, you must cut off the power supply.

Keyword:

Scan the QR code to read on your phone

Relate News

There is currently no information to display
Please add data record on website background.

COPYRIGHT   PAPAGENO GROUP CO.,LTD

津ICP备2020007851号